Lowrance HDS-10 Fish Finder
Product Description:
The finest of new Lowrance fishfinding and GPS navigation technologies with massive, high-
definition 10.4”/26.4 cm Super VGA color viewing. The new SolarMAX™ PLUS display renders
brilliant detail in sunlight with the best wide-angle viewing ever available, while advanced pure-
white LED screen/keypad backlighting fully adjusts to zero-dim for night fishing.

The unique new FlyWheel™ dial and command soft keys give you easier and quicker control of
Broadband Sounder fishfinding and satellite navigation precision via the built-in 16-channel
GPS+WAAS antenna.

HDS built-in cartography choices include Enhanced U.S. Basemap, or the amazing, life-like and
new Insight USA™ with combined Inland and Coastal coverage (Americas) - Or Navionics World
Background map (non-Americas). Plus, this HDS is now fully compatible with all Navionics®
chartcards – Platinum+, Platinum, Platinum HotMaps – with two high-speed SD card slots. Fully
ready to build your complete stand-alone or networked onboard system.
200 khz transducer
HST-WSBL        Part #106-72      
Transom-mount, skimmer with built-in temperature sensor. (20 ft cable)      

HS-WSBL        Part #106-71     
Transom-mount, skimmer transducer. (20 ft cable)       

PDRT-WBL        Part #106-89       
Shoot-thru-hull mount, 20 degree pod type with remote temperature (200 kHz). (20 ft cable)        

PDT-WBL        Part #106-74       
Trolling motor-mount, pod type with built-in temperature sensor. (12 ft cable)       

PD-WBL        Part #106-73     
Trolling motor-mount or shoot-thru-hull, pod type transducer. (20 ft cable)      

PTT-WSBL        Part #106-76     
Portable-mount, skimmer with built-in temperature sensor. (16 ft cable)     

Dual Frequency Transducer
B164 Thru-Hull Transducer        Part #136-06      
50/200 kHz, 12 degree, 1kW RMS, tilted element. Flush mounted with less than 6.35 mm (0.25")
hull exposure. Can sit on trailer rollers and bunks with no damage at all.       

B258 Thru-Hull Transducer        Part #136-00      
50/200 kHz, 1kW RMS, with faring block. Provides deep water sounding with superb target and
bottom definition.    

B60 Thru-Hull Transducer        Part #21-001       
Bronze 50/200 kHz, 600W RMS. Provides a vertical beam without a faring. Internal element is
tilted to provide built-in deadrise compensation. Nearly flush housing minimizes drag.  

B744V Triducer        Part #136-05       
50/200 kHz, 600W RMS. Depth, speed, and temperature in a single housing. Includes a faring

HP-DFBL260        Part #106-82      
Thru-hull-mount, dual frequency bronze housing, high-power multiple element (50 kHz 19 degree
& 200 kHz 6 degree).    

HST-DFSBL        Part #106-77     
Transom-mount, dual frequency skimmer with built-in temperature sensor. (25 ft cable)       

M260 In-Hull Transducer        Part #106-91      
50/200 kHz, 1kW RMS. Separate elements for exceptional deep water performance and detail.      
P319 Thru-Hull Transducer        Part #136-02     
50/200 khz Dual Frequency, 600 W RMS, in a low-profile housing. Flush design that minimizes

P79 In-Hull Transducer        Part #136-03     
50/200 kHz, 600W RMS. Easily adjusts to hull deadrise angles up to 22 degrees. Base is bonded
to the hull and filled with liquid. Transducer attaches to the base with a twist lock.     

Gimbal Brackets and In-Dash Mounting Kits
FM-12        Part #124-65    
Flush-Mount Kit for all HDS units.       

GB-22        Part #124-60      
Gimbal Bracket for HDS-10 units.    

MB-36        Part #000-0124-75      
RAM heavy duty 2-1/4" ball mounting bracket with short arm for 10" HDS units.    

MB-38        Part #124-77     
Heavy Duty RAM Mount.    

Gimbal Knobs and Washers
GK-12        Part #124-56       
Gimbal Knob Set for all HDS units. Included with purchase of GB-19 gimbal bracket.   

GPS Module Accessory
LGC-4000        Part #000-0125-28      
GPS Receiver. Comes with installation manual, 15ft NMEA 2000 cable, pole mount, NMEA 2000 T
connector, mounting hardware, & gasket seal.      

LowranceNET Red
NMEA Starter Kit        Part #124-69      
Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two
T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension
cable (N2KEXT-15RD), and a power node (N2K-PWR-RD). For use with all Red network devices.  
Power Cables & Adapters
CA-8        Part #119-10       
Cigarette plug power cable.    

PC-30        Part #127-49      
Power Cable for all HDS units.      

Protective Covers
BZ-DR-4        Part #000-0124-82      
Bezel & SD card door replacement for HDS-10.      

CAP-1        Part #000-0124-70        
Set of connector caps for HDS units.     

CVR-15        Part #124-64        
Protective Cover for HDS-10 units.      

Transducer Extension Cables
XT-12BL        Part #99-93      
12' transducer extension cable.     

Transducer Switch Boxes
SB-10BL        Part #46-27    
Switches 2 Sonar units between 1 Transducer.     

SB-9BL        Part #46-26      
Switches 2 Transducers between 1 Sonar unit.